Page Comparison

In this chapter, we describe the very basic procedure of using management console.

1.Login to Console

Login to our management console in accordance with the mail at the time of account registration.

fig.1 Mangement Console Login(click to enlarge)

Image RemovedImage Added

fig.2 If login successful,you can show the Dashboard(click to enlarge)

Image RemovedImage Added

2. Create New Device

Create new device from manually.

fig.3 Go to Device Mangement page(click to enlarge)

Image RemovedImage Added

fig.4 Choose Create New Device and create it.(click to enlarge)Image Removed

fig.5 Okay,New device has been created.(click to enlarge)

Image Removed

3. Create New Channel

Create new channel from manually.

fig.6 4 Go to Channel Mangement page(click to enlarge)

Image RemovedImage Added

fig.7 Choose Create New Channel and create it.(click to enlarge)Image Removed

fig.8 Okay,New Channel has been created.(click to enlarge)

Image Removed

4. Map the channel to the device

Map the channel to the device.

fig.9 5 Return to Device Mangement page,edit device 'test_device DEVICE1234'(click to enlarge)

Image RemovedImage Added

fig.10 Determine the stream destination to CH:0 that created.(click to enlarge)

Image Removed

fig.11 'DEVICE1234

After that,'test_device' has been mapped to the CH0.(click to enlarge)Image Removed

5. Generate test stream

Generate test stream and confirm.

fig.12 6 Go to Device Simulator page.Set sender device and stream, then Generate.(click to enlarge)

Image RemovedImage Added

fig.13 7 Go to Stream page and you can see that the stream(=20) has been sent.Great!!(click to enlarge)

Image RemovedImage Added

fig.14 8 JSON raw data shown by Raw Data tab.(click to enlarge)

Image RemovedImage Added